Klarstein 10029385 Bedienungsanleitung Seite 22

Touch Control 1
Depress this button to turn on/off the motor.
Press this button for increasing the speed of the fan.
Press this button for decreasing the speed of the fan.
Turn on/off light.
Fan speed display:
1 = low speed
2 = medium speed
3 = high speed
Quick timer:
Press + & - hold for 1 second, Digital display will flashing & into 5 minutes count down, after 5 minutes motor &
light will turn off automatic & Buzzer sound for 1 second.
Touch Control 2
After plug in power, will into Stand By mode automatic. With + and - you can adjust the speed. With the light
button the light can be switched on and off.
Time setting:
keep pressing the Timer button
mer button change to minute setting, press + or - for setting, press Timer button again or wait 10s finish time
setting.
Timer setting:
Timer setting, short press during working mode, pre-set cycle : Off > 15 mins > 30mins > 45mins > Off.
+ or - for adjusting timer time, except „off" timer setting.
Quick Timer:
Press + & - hold for 1 second, Digital display will flashing & into 5 minutes count down, after 5 minutes motor &
light will turn off automatic & Buzzer sound on.
in stan by mode, hour display flashing. press + or - for setting, press Ti-
22