Klarstein 10029385 Bedienungsanleitung Seite 18

Chimney Installation
1. Put the upper chimney into lower chimney .Then
pulling out the upper chimney upwards. Adjust to
reach the height required.
For Tower chimney hood
1. By put the inner chimney into upper chimney.
Then pulling out the upper chimney upwards.
Adjust to reach the height required.
2. Sliding the chimney to adjust the chimney
height. When the height you required is reached,
then hang the fixing hole to the fixing screws as
showed in picture.
2. Fix the lower chimney with 2 pcs of 4 x 8mm
screws.
18