Klarstein 10029385 Bedienungsanleitung Seite 19

3. Sliding the chimney to adjust the chimney
height. When the height you required is reached,
then fix 2 pcs of 4x8mm screws onto the hole
fixing with plate (see arrow) as showed in picture.
5. Use 2pcs 4 x 8 mm screws to attach lower and upper chimney together, do not fasten screws too much,
make sure upper decorative chimney can be telescopically adjusted after assembled.
19
4. Drill 2 x 8mm holes to accommodate the plate
(see arrow). Screw and tighten the plate II onto
the wall with 2 screws provided. Assemble the
chimney onto the unit and fix it with 2 screws.
(A) Oberer Kamin
(B) Untere Kaminbefestigung
(C) Unterer Kamin