ZUMEX ANEXO Bedienungsanleitung Seite 25

MANUAL MODE (HELP MODE): Some machine models have an actuator or an auxiliary operating
sensor. This can be annulled by selecting the MANUAL mode. [Self Service Model: SS tap. Tank (44)
and Cooler Model: Level detector (56)].
WASTE LIMIT: You can activate an alarm so that the machine will stop when the desired number of
oranges has been squeezed. Thus, you will know when the waste bin has to be emptied.
CALIBRATION: You can calibrate the machine to guarantee that the machine count is correct at
all times.
MACHINE STATUS: You have access to the different anomalies that a machine stoppage may have
caused.
CONTRAST: You can adjust the brightness level on the display.
Remember! Within the CLIENT MENU mode:
"Short OK" to go down a level.
"Long OK" to go up a level.
"Long OK" to save data (The save symbol will appear).
To exit CLIENT MENU, you must go up the same number of levels you have gone down.
MENU DIAGRAM
MAIN MENU
BASIC
AUTOMATIC
015.030
PIN
****
OK
MENU MENU MENU MENU
1.Language 2.Pin 3.Counter 4.Mode
OK OK OK OK
1
LANGUAGE . Select the language
to operate the machine.
2
PIN. See or change the PIN.
3
COUNTER. See total or partial
counter of the machine.
4
MODE. Select the working mode:
automatic or professional.
MENU MENU MENU MENU
5. W aste limit 6.Calibrate 7.State 8.Contrast
OK OK OK OK
5
WASTE LIMIT. Activate a warning to know
when to empty the waste bin.
6
CALIBRATION. To calibrate the machine
for correct count.
7
STATUS. Access the different anomalies that
a machine stoppage may have caused.
8
CONTRAST. To adjust the brightness level on
the display.
47