Herunterladen Inhalt Inhalt Diese Seite drucken

ZUMEX ANEXO Bedienungsanleitung Seite 23

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 56
SPEED PRO BASIC MODEL
AUTOMATIC MODE
From automatic mode:
START STARTS THE MACHINE
STOP STOPS THE MACHINE
Uninterrupted operation.
SPEED PRO SELF SERVICE, SPEED PRO SELF SERVICE PODIUM,
SPEED PRO SELF SERVICE PODIUM DRAIN&CLEAN SYSTEM
The START button is not active. It is only active in MANUAL mode.
AUTOMATIC MODE
Control from SS tap (44).
Uninterrupted operation,
whilst the tap is pressed.
PROFESSIONAL MODE
Control from tap whilst pressed.
1
MINIMUM NUMBER OF ORANGES
MAXIMUM NUMBER OF ORANGES
12
DEFAULT VALUE
3
PROFESSIONAL MODE
1
MINIMUM NUMBER OF ORANGES
12
MAXIMUM NUMBER OF ORANGES
DEFAULT VALUE
3
Operation until its reaches the quantity stipulated.
MANUAL MODE (If the tap does not work)
The START button becomes active in Manual mode.
In manual mode, it is still possible in Automatic
and Professional mode from the keypad.
"AUTOMATIC" MANUAL
Uninterrupted operation.
"PROFESSIONAL" MANUAL
1
MINIMUM NUMBER OF ORANGES
12
MAXIMUM NUMBER OF ORANGES
3
DEFAULT VALUE
The STOP button is always operative.
SELF SERVICE TAP (44)
You have purchased a multi-function tap. This enables you to produce juice either discontinuously
or continuously without having to press the button.
Locking: You may lock the tap at any time for it to only work in one of the 2 possible ways.
See the different possibilities in: ASSEMBLY OF COMPONENTS ACCORDING TO MODEL, SS TAP (44).
SPEED PRO TANK PODIUM, SPEED PRO TANK PODIUM DRAIN&CLEAN SYSTEM,
SPEED PRO COOLER
Make sure that the TANK (53) or Tank (70.6) is placed as close as possible to the sensor on the base.
Make sure that the buoy is placed correctly on the lid and that it moves freely (Figure 5 and Figure 6).
If the Tank/Cooler buoy (52) is not in place, the machine will not work.
AUTOMATIC MODE
When you connect the machine at the start of the day, select the START button
for the machine to start up.
The machine starts to squeeze until the tank is full and the Level detector (56)
does not find the Tank/Cooler buoy (52). The machine will stop then.
When the juice level gets low again, the machine will start up again, about 15" after it has not
detected the buoy, and so on and so forth, in automatic mode.
The full or half full tank symbol will appear unless STOP has been pressed, indicating that although
the machine is in automatic mode, it has stopped, waiting for the tank to be emptied, in order to
re-start the filling process. When you press STOP, the symbol will disappear as the machine is no
longer operating.
1
2
3
4
43

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis