Parker AC30E Produkthandbuch Seite 455

Parameter Name No.
Status Word 0661
This is the DS402 Status Word
Sequencing State 0678
Drive DS402 Sequencing State.
Switch On Timeout 0679
Time allowed for line contactor to close when entering the Switched On state from Switched Off state. If this time is non-zero, a Line
Contactor trip will occur if the DC Link Voltage remains low until the timeout expires. If the timeout is set to zero, an Under Voltage trip
will occur immediately.
App Reference 0680
Reference from terminals (via. the application)
AC30 series Variable Speed Drive
Path
Parameters::Motor Control::Sequencing
Parameters::Motor Control::Sequencing
Parameters::Motor Control::Sequencing
Parameters::Motor Control::Sequencing
Parameter Reference
Default Range
0:READY TO SWITCH ON
1:SWITCHED ON
2:OPERATION ENABLED
3:FAULTED
4:VOLTAGE ENABLED
5:QUICKSTOP INACTIVE
6:SWITCH ON DISABLED
9:CONTROL FROM COMMS
12:JOG OPERATION
13:REVERSE OPERATION
14:REFERENCE FROM
COMMS
15:STOPPING
0:NOT READY TO SWITCH ON
1:SWITCH ON DISABLED
2:READY TO SWITCH ON
3:SWITCHED ON
4:OPERATION ENABLED
5:QUICKSTOP ACTIVE
6:FAULT REACTION ACTIVE
7:FAULTED
0.000 0.000 to 100.000
0.00 -110.00 to 110.00
D-169
Units Writable
NEVER
s NEVER
s ALWAYS
% ALWAYS