Items Supplied; Proper Use - EINHELL TE-TS 2231 U Originalbetriebsanleitung

124. Washer 6mm, small

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
2.2.1 Bench-type circular saw:
•
Saw blade guard
•
Stop rail (universal stop)
•
Universal stop
•
Guide rail for universal stop, front
•
Guide rail for universal stop, left
•
Leg front right/back left (2x)
•
Leg front left/back right (2x)
•
Rubber foot, type A (2x)
•
Rubber foot, type B (2x)
•
Longitudinal strut (2x)
•
Cross strut (2x)
•
Table support (4x)
•
Length extension table
•
Strut for length extension table (2x)
•
Chassis, ready-assembled
•
Transport handle (2x)
•
Push stick
•
Push block
•
Holder for push stick
•
Key for changing the saw blade
•
Open-ended wrench for blade change
•
Lug for length extension table, left
•
Lug for length extension table, right
Anl_TE_TS_2231_U_2831_UD_SPK7.indb 29 Anl_TE_TS_2231_U_2831_UD_SPK7.indb 29
GB
•
Self-locking nut size M6 (44x)
•
Self-locking nut size M8 (4x)
•
Nut size M6 (6x)
•
Washer, large (4x)
•
Washer, medium (50x)
•
Washer, small (4x)
•
Allen screw (4x)
•
Hex screw size M6 x 16 (52x)
•
Hex screw size M4 x 10 (4x)
•
Extractor connection for housing
•
Lug for foot (4x)
•
Spring washer, small (4x)
•
Original operating instructions
•
Safety information
2.2.2 Items supplied
Special accessories - slide:
•
Slide plate with scale
•
Stop rail
•
Guide rail
•
Angle (rear)
•
Clamping lever for angle setting
•
Angle (front)
•
Strut (rear)
•
Strut (front)
•
Hex screw (M10 x 65)
•
Washer 8 mm (2x)
•
Spacer ring (plastic), 2x
•
Allen screw, long, 2x
•
Allen screw, short, 8x
•
Button, 2x
•
Spring washer
•
Profile
•
Nut size M8, self-locking, 2x
•
Washer 6 mm, large, 4x
•
Hex screw M8 x 16, 2x
•
Hex screw M6 x 16, 4x
•
Nut size M6, self-locking, 8x
•
Nut size M8, self-locking (plastic lock)
•
Washer 10 mm
•
Washer 8 mm, small, 2x
•
Washer 6 mm, small, 12x

3. Proper use

The bench-type circular saw is designed for the
slitting and cross-cutting (only with the cross
stop) of all types of timber commensurate with the
machine's size. The equipment is not to be used
for cutting any type of round wood.
- 29 -
23.04.14 08:39 23.04.14 08:39