Product Description; Scope Of Delivery; Product Functions - Sentiotec Just Sauna Fin Montage- Und Gebrauchsanweisung

Instructions for installation and use

3. Product description

3.1. Scope of delivery

● Operating unit
● Power unit
● Heater sensor with integrated excess temperature fuse (F1)
● Bench sensor (F2)
● Sensor wires
● Installation material
3.2. Accessories
● Foil sensor (item number: P-ISF-FF)
● Power booster (item number: O-S2-18 / O-S2-30)
● Safety shut-off (item number: HT-SWL)

3.3. Product functions

The sauna control unit just sauna fi n features the following functions:
● Regulation of sauna heaters of up to 10.5 kW in the temperature range span-
ning 55 °C to 110 °C.
● A power booster allows the maximum heating output to be increased from
10.5 kW to 18 kW or 30 kW.
● Optional dimming or activation of a room light (up to 100 W)
● Optional dimming or activation of a fan (up to 100 W)
● Optional dimming (up to 500 W) or activation (up to 3.5 kW) for an addi-
tional output.
The additional output does not feature an excess temperature fuse.
For this reason, only intrinsically safe devices should be operated using the
additional output.
– If infrared lamps are connected to the additional output, these must
have an excess temperature fuse. We recommend using the following
infrared lamps:
● DIR-350-R, WIR-350-R, DIR-500-R, WIR-500-R, DIR-750-R,
WIR-750-R, DIR-1300-R, WIR-1300-R
● ECO-350-R, ECO-350-G, ECO-500-R, ECO-500-G, ECO-750-R
WORLD OF WELLNESS
p. 9/40
EN