How To Activate The Rinse Aid Dispenser; Acoustic Signals - Electrolux GA 55 LVSW Benutzerinformation

66 www.electrolux.com
• The acoustic signals sound: e.g. 5
3. Press
the setting.
4. Press the on/off button to confirm the
setting.
6.3 Use of rinse aid and multi-
tablets together
When you activate the option Multitab, the
rinse aid dispenser no longer releases
rinse aid. However if you are using multi-
tablets and the drying results are not
satisfactory, we suggest to use multi-
tablets and rinse aid together. In this case
you have to activate the rinse aid
dispenser.
The rinse aid dispenser will remain
activated until you modify the setting again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
and the display is blank.
2. Press
• The indicators
• The indicator
• The display shows the current
3. Press
= rinse aid dispenser activated.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
intermittent signals = level 5.
again and again to change
until the indicators
and
.
and
go off.
flash.
setting: = rinse aid dispenser
deactivated.
to change the setting.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs and
when you set the level of the water
softener. It is not possible to deactivate
these acoustic signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
and
,
start to flash
3. Press
4. Press the on/off button to confirm the
continues to
hold simultaneously
until the indicators
and
and the display is blank.
.
• The indicators
off.
• The indicator
to flash.
• The display shows the current
setting: = Acoustic signal off.
to change the
setting.
= Acoustic signal on.
setting.
and
,
start to flash
and go
continues