Data Logger - SI Analytics HandyLab 750 Gebrauchsanleitung

Data Logger

The Data Logger
The meter provides a data logger. Prior to use, it must be configured and
then activated. You can choose from the following logger types:
• DIFF (signal-controlled logging of measured variable and temperature)
• INT (time-controlled logging at a fixed interval)
• DIFF+INT (combined time- and signal-controlled logging)
• SHOT (manual logging by pressing the STO key)
The data logger records up to 5000 entries and saves them in a circular buf-
fer.
Already existing entries will be overwritten.
The following data are recorded: primary value, temperature, time stamp and
device status.
The HandyLab Pilot software allows convenient management of the data
logger. It is always the currently selected process variable which is recorded.
The "STO" icon and the memory address is displayed briefly to indicate that
an entry is being saved.
Display: Icons related to the data logger
Memory address (0026)
Measured
value is
being saved:
STO
RCL:
Measured
values are
displayed
Data logger activated
46
Date Time
Next value
Temperature
Logger type
Primary
process
variable