Technical Data; Installation - IKEA MATÄLSKARE Bedienungsanleitung

ENGLISH

Technical data

Supply Voltage
Rated Power Input
Fuse
MW output power
Outer dimensions (HxWxD)
Cavity inner dimensions (HxWxD)
The technical informations are situated in
the rating plate inside the appliance.
Data for test heating performance in
accordance with IEC 60705.
The International Electrotechnical
Commission, SC. 59H, has developed a
standard for comparative testing of heating
performance of different microwave ovens.
We recommend the following for this oven:
Test
12.3.1
12.3.2
12.3.3
13.3
NOTE: this information is only for the qualified technician.

Installation

Mounting the appliance
Follow the supplied separate mounting
instructions when installing the appliance.
Children should not perform installation
operations. Keep children away during
installation of the appliance. Keep the
packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of
children, during and after the installation of
the appliance.
Use protective gloves to perform all
unpacking and installation operations.
The appliance must be handled and
installed by two or more persons.The
appliance must be disconnected from the
power supply before carrying out any
installation operation.
Amount Approx. time
750 g
475 g
900 g
500 g
220-240 V/50 Hz
1300 W
10 A (UK 13 A)
750 W
394 x 595 x 320
187 x 370 x 290
Power level
10 min
5 ½ min
14 min
2 min 40 sec
After unpacking the appliance, make sure
that it has not been damaged during
transport. In the event of problems, contact
the dealer or your nearest After-sales
Service.
After unpacking the appliance, make sure
that the appliance door closes properly.
In the event of problems, contact the dealer
or your nearest After-sales Service. To
prevent any damage, only remove the oven
from its polystyrene foam base at the time
of installation.
During installation, make sure the appliance
does not damage the power cable.
Container
750 W Pyrex 3.227
750 W Pyrex 3.827
750 W Pyrex 3.838
Jet Defrost
14