Possible Troubleshooting - EdilKamin IDROPELLBOX Installation, Betrieb Und Wartung

regarding the motivation of the shutdown (see the various alarms below).
Never pull the plug during shutdown on account of malfunction.
tand then press the button 0/1.
crucible.
INDICATION OF POSSIBLE CAUSES OF MALFUNCTION AND INDICATIONS AND REMEDIES:
1) Signalling: H2O PTC_FAULT
Problem: Shuts down due to the water temperature sensor being broken or disconnected.
Actions:
Problem: Shutdown for smoke extraction speed fault detection
Actions:
3) Signalling: Stop/Flame:
Problem: Turns off due to drop in smoke temperature
4) Signalling: Block_FI/NO Start:
Problem: Turns off due to incorrect smoke temperature during ignition
Flame does NOT appear
Actions:
Flames appear, but AF appears on the display after Ar.
Actions:
5) Signalling: Black Out:
Problem:
Actions:
6 ) Signalling: Fault/RC:
Problem: Turns off due to thermo coupling failed or disconnected
Actions:
7) Signalling: smoke °C/high.: (
Problem: Spegnimento per superamento temperatura massima fumi.
incorrect installation,

POSSIBLE TROUBLESHOOTING

- 39
-