Morso FORNO Aufstellungs- Und Bedienungsanleitung Seite 12

e n g l i s h •
I n s t r u c t I o n s f o r I n s ta l l at I o n a n d u s e
Installation
1. Place the plinth on a flat solid surface where you want the
outdoor fireplace to stand.
Remember to allow for offsets to flammable materials.
2. Use the three adjusting screws to set the plinth absolutely
level. You may want to use a spirit level.
It is important for the plinth not to stand directly on the soil.
Ensure that there is a min 5mm air gap all the way round.
3. Place the firebox on the plinth such that the shadow edges
on the plinth and firebox are flush.
Below firebox are three feet, which fit into the notches in the plinth. These ensure that the
firebox is stable.
4. The chimney is fitted in place on top of firebox with a revolving
movement. The holes must face upwards.
5. If you want to use the ash catch, squeeze the it slightly
together to allow it to be moved into the opening and turned
into place.
12