Maintenance And Cleaning; Technical Data - BASETech 1382128 Bedienungsanleitung

• Once the internal rechargeable battery of the power bank has been fully charged, the power
LED lights up red. Disconnect the cable from the power bank and USB power source.
• The power bank is now ready for use.
b) Charging a mobile device
• Connect the type A USB plug of the provided cable to the USB-A OUT: DC 5V (2) port of the
power bank.
• Connect the micro USB plug to the micro USB port of the mobile device to be charged.
• The power LED lights up blue.
• Monitor the charging process. Once the mobile device/ smartphone has been charged (or
the rechargeable battery of the power bank is empty), the power bank turns off. The power
LED turns off as well.
• Disconnect the USB cable from the product and mobile device after charging.

Maintenance and cleaning

• Never use aggressive or abrasive cleaning agents, rubbing alcohol or other chemical
solvents, as those can damage the housing or even affect the operation of the product.
• The product does not require any maintenance, do not disassemble it. The rechargeable
battery is built-in and not replaceable.
• Disconnect the product from the power supply (USB port) and any connected devices before
cleaning.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure
to the housing to prevent scratching. You can easily remove dust using a long-haired, soft
and clean brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical data

Input voltage/current ............................. 5 V/DC, 0.8 A
Charging input ...................................... 1 x micro USB port
Output voltage/current .......................... 5 V/DC, 1 A
Charging output .................................... 1 x USB-A port
Internal rechargeable battery ................ Li-ion 3.7 V/DC / 2600 mAh
Housing material ................................... Aluminum
Operating conditions ............................. -20 to +45 °C, 20 - 85 % RH
Storage conditions ................................ -20 to +60 °C, 20 - 85 % RH
Dimensions (W x H x D) ....................... approx. 96 x 22 x 22 mm
Weight .................................................. approx. 77 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE. V2_0116_02-LS