Mount The Cover Plate And The Intake Grille; Handling For The Pipe Take-Off Part; Mount The Cover Plate (Right); Mount The Cover Plate (Left) - AirStage ABYA12GATH Installationsanleitung

(2) Others
Indication pattern
Indicator Name
OPERATION indicator lamp (Green)
TIMER indicator lamp (Orange)
FILTER indicator lamp (Red)
(Example) Function : 31, Setting number : 2
OPERATION
ON
indicator lamp
0.5s 0.5s 0.5s
(Green)
OFF
TIMER
ON
indicator lamp
0.5s 0.5s
(Orange) OFF
ON
FILTER
0.5s 0.5s 0.5s
indicator
OFF
lamp (Red)
8. MOUNT THE COVER PLATE AND THE IN-
TAKE GRILLE
] 1

8.1. Handling for the pipe take-off part

When the pipe is pulled out in the direction shown in the fi gure below, cover the take-off
part with material (putty or the like) that will block it off.
UNDER CEILING TYPE
FLOOR CONSOLE TYPE
9367701100-01_IM.indb Sec1:14 9367701100-01_IM.indb Sec1:14
Indication pattern
Function number; tens place (0.5s ON/0.5s OFF)
Function number; ones place (0.5s ON/0.5s OFF)
Setting number: (0 to 9) (0.5s ON/0.5s OFF)
1 cycle 12 sec
0.5s 0.5s 0.5s
9 sec
11 sec
10 sec
0.5s
Top
Rear
Right
] 1

8.2. Mount the cover plate (Right)

(1) Cut a pipe exit hole in the right plate. This is only when the pipe exits from the right
side. (This operation is not required when the protrusion is on the top or rear.)
Cover plate (Right) (Accessories)
(2) Join the cover plates (right) and mount with screws.
Tapping screw (M4 × 10 mm)
(Accessories)
] 1

8.3. Mount the cover plate (Left)

(1) Join the cover plates (left) and mount with screws.
Tapping screw (M4 × 10 mm)
(Accessories)

8.4. Mount the intake grille

(1) Cut the right side of the intake grille. This is only when the pipe exits from the right
side.
(2) Insert the hinges on the bottom of the intake grille into the holes in the base assembly.
Then mount the arms to the 3 areas on the top of the intake grille.
Cover plate (Left)
(Accessories)
En-14
2012-7-12 14:01:39 2012-7-12 14:01:39