K) Display Alignment; Ir Remote Control - Renkforce PowerPar 7 x 8 W PAR Bedienungsanleitung

k) Display Alignment

• Push the button MENU until "dISP" is displayed and push the button ENTER.
NO normal display alignment
YES Display alignment turned by 180°
• Press the ENTER button to confirm your selection.

12. IR Remote Control

Instead of operating the device via the display and the buttons at the rear of the device, it can also be
controlled via the enclosed IR remote control.
To control the effect spotlight with the IR remote control, point the IR remote control at the rear of the effect
spotlight and push the desired button.
The maximum range of the IR remote control is approx. 8 m.
Auto
Activates automatic mode.
Sound
Activates sound-to-light mode.
• Set the microphone sensitivity SP-1 (low) to SP-8 (high) with the buttons +/-.
DMX
Activates DMX mode.
• Set the DMX starting address with the buttons +/- or the number buttons 0-9.
• Push the DMX button again and set the number of DMX channels with the buttons +/-.
38