Auerswald COMfortel WS-R2 Inbetriebnahmeanleitung Seite 29

Click the Repeater tab.
1.
1.
4.
Click Read from Repeater.
2.
This displays the settings that are saved in the repeater.
Click Multi Cell Solution to configure the repeater for a mul-
3.
ticell system.
The user interface and button texts you will see here will
vary according to which settings are active.
Make the following settings:
4.
Multi Cell Solution: Enter the ARI of the DECT server.
You will find the ARI on the reverse of the DECT server or
in the Configuration Manager under Status > Wireless
Server.
Number of channels to transfer (Busy Bit): Input the
number of voice channels you want the repeater to man-
age (for COMfortel WS-R2, maximum 2 channels, for
COMfortel WS-R4, maximum 4 channels).
Base station to synchronize on: Enter the number of the
base station you want the repeater to synchronise with.
You will find this number in the DECT server Configuration
Manager under Administration > Base station in the
RPN field.
Repeater number: Enter a number for the repeater. You
can make the following entries: A number between 0 and
255.
COMfortel WS-R2/WS-R4 - Setup Guide V03 02/2015
Commissioning
2.
5.
3.
29