Commissioning
Note: The repeater's number is the same value as the number
of the base station + 64. Examples:
Base
0
1
2
3
4
5
6
Click Write to Repeater.
5.
This saves the settings in the repeater.
Further Steps
Disconnect the splitter from the repeater.
Connect the repeater.
Connecting the COMfortel WS-R2/R4
Requirements
–
A wall-mounted power supply of type number 15.2189
–
230 V mains socket
Warning: Inappropriate use or incorrect replacement of
the power plug can result in a life-threatening electric
shock, or can damage or destroy the device.
Only use the wall-mounted power supply supplied with the
equipment.
Insert the wall-mounted power supply plug into the RJ-10
1.
socket on the underside of the device.
Insert the wall-mounted power supply plug into a freely ac-
2.
cessible 230 V mains socket.
The repeater synchronises itself with the base station.
The LED on the front cover lights up in red.
30
Repeater 1
64
65
66
67
68
69
70
COMfortel WS-R2/WS-R4 - Setup Guide V03 02/2015
Repeater 2
128
129
130
131
132
133
134
Repeater 3
192
193
194
195
196
197
198