Connecting The Power Cord - Dell Line-Interactive Rack UPS 1920 Erste Schritte

Connecting the Power Cord

Verify that the power input to the UPS has adequate upstream overcurrent protection:
5
Table 1. Minimum Upstream Circuit Breaker Rating
UPS Output Power
1000W
1500W (at 100V)
1920W
2700W
6
For models with a detachable power cord.
connector on the UPS rear panel.
Plug the UPS power cord into a power outlet.
7
NOTE: For 1920/1500W models.
markings that can be used in Taiwan and Japan, another cord is for regions other than Taiwan and Japan.
16
|
Getting Started With Your System
120V 208V
15A —
20A —
30A 20A
Plug the detachable UPS power cord into the input
There are two power cords in the box, one with BSMI and PSE certified
230V
15A
15A
16A