Turning The Power On / Off; Shimano Steps Logo Screen - Shimano E6000 series Gebrauchsanweisung

„ Turning the power ON / OFF
< SC-E6010 >
Turning the power ON and OFF via the cycle computer
• With the power turned either ON or OFF, hold down the
button for 2 seconds.
< BT-E6000/BT-E6010 >
Turning the power ON and OFF via the battery
Press the power button once with the power turned ON or
OFF. All the indicators turn on when the power is on.
CAUTION
• When turning on the power, check that the battery is firmly
attached to the holder.
• Power cannot be turned on while charging.
When turning the power ON or OFF, do not place your foot on
the pedal.
Automatic power off function
If the bicycle has not moved for over 10 minutes, the power
will automatically turn off.
„ SHIMANO STEPS logo screen
This screen is displayed during system start up and
shutdown.
Power button
<BT-E6000>
Power button
Press once
<BT-E6010>
This screen is an example of the
SC-E6010 in the Light off road setting.
17
Power button
Press once