Herunterladen Diese Seite drucken

Adapting To Body Size - CYBEX PALLAS M SL Bedienungsanleitung

Werbung

ADAPTING TO BODY SIZE

In order to optimally adapt the CYBEX PALLAS M SL to your child's body size, a
seat insert (i) has been provided as standard and is already inserted under the seat
cover.
• We recommend using this additional seat insert (i) for children aged 9 to 24
months.
• From the age of 25 month, the seat insert (i) is no longer necessary.
• The seat can then be adjusted to your child's body simply by using the adjustable
headrest (e). To do this, pull the adjustment level (h) upwards to unlock the
headrest (e).
• Adjust it so that there is space for two fingers (ca. 2 cm) between the lower edge
of the headrest (e) and the shoulder of the child.
NOTE! Only an optimally adjusted headrest (e) can offer your child maximum protec-
tion and comfort while ensuring that the diagonal belt can be fitted smoothly (f).
The height of the CYBEX PALLAS M SL can be adjusted to one of twelve positions.
REMOVING THE ADDITIONAL SEAT INSERT
1. Release the front push buttons of the seat cover from the seat cushion (d).
2. Pull the fabric cover from the cover guides up and forward until you can pull out
the seat insert.
3. The seat insert must be removed in accordance with the age specifications
stated above.
4. Restore the seat insert to its original state and fix it in place again.
ADJUSTING THE IMPACT SHIELD – ECE GROUP 1 (9-18 KG)
By pushing the central adjustment button (z), you can adapt the impact shield to your
child. Hold down the central adjustment button (z) while you adapt the impact shield
to your child.
The side flaps of the impact shield (p) fit exactly between the arm rests and booster (d)
and are used to support the impact shield (p) on the seat.
Adjust the impact shield (p) so that it rests against the child without pushing against
the child's body.
ADATTAMENTO ALLA TAGLIA CORPOREA
Per adattare al meglio il CYBEX PALLAS M SL alla taglia corporea del bambino
deve essere fornito come standard ed essere già inserito sotto la fodera del sedile
un inserto per sedili (i).
• Si raccomanda di usare questo inserto per sedili (i) aggiuntivo per i bambini da 9
a 24 mesi.
• Dall'età di 25 messi in poi l'inserto per sedili (i) non sarà più necessario.
• Il seggiolino sarà quindi adattabile al corpo del bambino usando semplicemente
il poggiatesta (e) regolabile. A tale fine tirare in alto la leva di regolazione (h) per
sbloccare il poggiatesta (e).
• Regolare in modo che vi siano due dita di (ca. 2 cm) spazio tra il bordo inferiore
del poggiatesta (e) e le spalle del bambino.
NOTA BENE! Solo un poggiatesta (e) regolato al meglio offre al bambino il massimo
in fatto di protezione e comfort e assicura allo stesso tempo lo scorrimento ottimale
della cintura diagonale (f). L'altezza del CYBEX PALLAS M SL è regolabile in una
delle dodici posizioni.
RIMOZIONE DELL'INSERTO PER SEDILI AGGIUNTIVO
1. Sganciare i bottoni automatici anteriori della fodera del sedile dal cuscino (d).
2. Sollevare in avanti la fodera di tessuto dalle rispettive guide fino a poter estrarre
l'inserto per sedili.
3. L'inserto per sedili deve essere rimosso in linea con le specifiche relative all'età
indicate sopra.
4. Riposizionare correttamente la fodera e fissarla nuovamente.
REGOLARE IL CUSCINO DI SICUREZZA, GRUPPO ECE 1 (9-18 KG)
Premendo il pulsante di regolazione centrale (z) è possibile adattare il cuscino di
sicurezza al bambino. Tenere premuto il pulsante di regolazione centrale (z) mentre si
adatta il cuscino di sicurezza al bambino.
Le alette laterali del cuscino di sicurezza (p) entrano precisamente tra i braccioli e la
superficie di seduta (d) e supportano il cuscino di sicurezza (p) sul seggiolino.
Regolare il cuscino di sicurezza (p) in modo che poggi contro il bambino senza
comprimerne il corpo.
13

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

Solution m sl