Inhaltsverzeichnis
Werbung
The figures of the following special accessories can be found on page 4 of these instructions.
6.997-343.0
Pump pre-filter, small (flow
rate up to 4000 l/h)
6.997-344.0
Pump pre-filter, large (flow
rate up to 6,000 l/h)
6.997-350.0
Suction assembly 3.5 m, 3/4" Completely ready for connection, vacuum-proof spiral hose with suc-
6.997-349.0
Suction assembly 7.0 m, 3/4"
6.997-348.0
Suction hose 3.5 m, 3/4"
6.997-359.0
Pump connection G1 (33.3
mm) incl. Check valve
6.997-347.0
Vacuum-proof spiral hose,
yard goods, 25 m, 3/4"
6.997-346.0
Vacuum-proof spiral hose,
yard goods, 25 m, 1"
6.997-345.0
Suction filter Basic 3/4"(19
mm)
6.997-342.0
Suction filter with backflow
stop, basic, 1"
6.997-341.0
Suction filter with backflow
stop, premium
6.997-360.0
Suction hose for pipes 0.5
m, 3/4"
6.997-340.0
Connection kit Premium
6.997-417.0
Pressure compensating
hose 3/4" (19mm), 1m
6.997-355.0
Dry run fuse
6.997-546.0
Dry run fuse
Type E (CEE7/5)
Country version BE, CZ, ES,
FR, PL SK
12
Special accessories
Pump pre-filter for all common pumps without integrated filters. To
protect the pump against coarse dirt particles or sand. The fine filter
can be washed. For pumps with G1 (33.3 mm) connection thread.
Pump pre-filter for all common pumps without integrated filters. To
protect the pump against coarse dirt particles or sand. The fine filter
can be washed. For pumps with G1 (33.3 mm) connection thread.
tion filter and backflow stop. Can also be used as an extension for
the suction hose. For pumps with G1 (33.3 mm) connection thread.
Completely ready for connection, vacuum-proof spiral hose for direct
connection to the pump. To extend the suction assembly or for use
with suction filters. For pumps with G1 (33.3 mm) connection thread.
Vacuum-resistant connection of the hoses to the pump.
For pumps with G1 (33.3 mm) connection thread and 3/4" as well as
1" hoses, including union nut, hose clamp, flat packing and check
valve.
ATTENTION
Do not install the check valve included in the set!
Vacuum-proof spiral hose. Yard goods for cutting hoses to individual
lengths. When combined with the Kärcher connection pieces and the
Kärcher suction filters, it can be used as an individual suction assem-
bly.
To be connected to the suction hose yard goods. The backflow stop
prevents the return flow of the delivered water and thus reduces the
time required for suction to start again. Including hose clamp.
To be connected to the suction hose meter length. The backflow stop
prevents the return flow of the transported water and thus shortens
the re-suction time.
Durable metal/plastic construction. Suitable for 3/4" (19 mm) and 1"
(25.4 mm) hoses.
Including hose clamp.
Vacuum-tight hose to reduce noise with fixed installations. 1"(25.4
mm) hose with threaded connection G1(33.3 mm) on both ends.
Caution: The suction hose may not be used as a pressure hose.
For the connection of 3/4" (19 mm) water hoses to pumps with G1
(33.3 mm) connection threads. For increased water flow.
Connecting hose for the pressure compensation in the domestic wa-
ter supply system. To connect the pump to rigid pipe line systems.
Furthermore, the internal storage volume in the hose prevents fre-
quent switching on and off of the pump.
G1 (33.3 mm) connection thread.
If no more water flows through the pump, the dry run fuse will protect
the pump from damage and automatically turn it off. With G1" (33.3
mm) threaded connection.
– 3
EN
Werbung
Inhaltsverzeichnis
