Maintenance And Care; Technical Specifications - Kärcher G 4.10 M Originalbetriebsanleitung

Maintenance and care

WARNING
Prior to any care or maintenance work, switch the de-
vice off and let the engine cool down. In order to avoid
an accidental start-up of the engine, remove the spark
plug connector.
To avoid risks, all repairs and replacement of spare
parts may only be carried out by the authorised custom-
er service personnel.
Prior to longer periods of storage, e.g. in the winter:
 Remove filter from suction hose for detergent and
clean under running water.
 Pull out the sieve in the water connection using flat-
nose pliers and clean under running water.
 Pull out the fine filter in water connection using flat-
nose pliers and clean with running water.
Pump maintenance
The pump is maintenace-free.
Engine maintenance
 Park the machine on an even surface.
 Carry out maintenance tasks to the motor accord-
ing to the specifications provided in the operating
instructions of the motor manufacturer.
Use only original KÄRCHER spare parts. You will find a
list of spare parts at the end of these operating instruc-
tions.
Troubleshooting
You can rectify minor faults yourself with the help of the
following overview.
If in doubt, please consult the authorized customer ser-
vice.
Appliance is not running
 Follow operating instructions of the motor manu-
facturer!
Pressure does not build up in the appliance
 Check setting at the spray lance.
 Appliance ventilation: Switch the appliance on with
the high-pressure hose detached and operate
(max. 2 minutes) until the water exits the high-pres-
sure connection without bubbles. Switch off appli-
ance and reconnect high-pressure hose.
 Check the water supply.
 Pull out the sieve in the water connection using flat-
nose pliers and clean under running water.
 Overflow valve blocked: Press the lever on the
handgun many times.
Strong pressure fluctuations
 Clean high-pressure nozzle: Remove dirt and de-
bris from the nozzle bore, using a needle and rinse
through with water from the front.
 Check water flow quantity.
Appliance is leaking
 Slight leakage from the appliance pump is normal.
If the leakage increases contact the authorized
customer service.
20
Care
Spare parts
No detergent infeed
 Use spray lance with pressure regulation (Vario
Power).
Turn the spray lance to "Mix" position.
 Clean the detergent suction hose filter.
 Check the detergent suction hose for kinks.

Technical specifications

Water connection
Max. feed temperature
Min. feed volume
Max. feed pressure
Max. Suction height
Motor
Type
Cylinder capacity
Motor; see operations instructions of the motor manu-
facturer
Performance data
Working pressure
Max. permissible pressure
Water flow rate
Detergent flow rate
Recoil force of trigger gun
Dimensions and weights
Length
Width
Height
Weight
Values determined as per EN 60335-2-79
Hand-arm vibration value
Uncertainty K
Sound pressure level L
Uncertainty K
pA
Sound power level L
K
WA
Subject to technical modifications!
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.
(See address on the reverse)
– 10
EN
°C
I/min
MPa
m
Grow 154F
cm
3
MPa
MPa
I/min
I/min
N
mm
mm
mm
kg
m/s
2
m/s
2
dB(A)
pA
dB(A)
+ Uncertainty dB(A)
WA
Warranty
40
10
1,2
0,5
87
11
12
7
0,3
17,3
431
390
921
22
< 2,5
0,3
87
3
104