Schaub Lorenz IN3FZ Bedienungsanleitung Seite 44

2. Touch the
KEEP
Disable.
a. Touch the
KEEP
want to disable. The cooking zone will operate in its
previous setting.
b. Set the
SLIDER CONTROL
You can operate this zone as a single zone or as two independent zones.
The flexible zone consists of two independent inductors you can operate
separately. When you operate the flexible zone as a single zone, the part, which
is not covered by cookware, is switched off automatically after 1 Minute.
Always place cookware on the centre of the cooking zone. When you use big,
oval, rectangular or long cookware, place it on the centre of the flexing zone
covering the two crosses (look at drawing below).
As a big single zone.
1. Touch the dedicated sensors.
2. Set the power level as usual.
3. When you move the cookware from the front to the back of the flexible zone
(and vice versa), the new position will be detected automatically keeping the
- control. The indicator displays
WARM
- control of the cooking zone you
WARM
to the desired power level.
The flexible zone
Examples of good and bad placement.
.
44