Schaub Lorenz IN3FZ Bedienungsanleitung Seite 43

4. Beware of the hot surfaces of the cooking zones! An H
indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has
cooled down. You can use the H for saving energy →
you can start a new cooking procedure on a cooking
zone, which is still warm/hot.
1. Enable. Touch the
sensor of the cooking zone you want to enable.
2. Touch the
BOOSTER CONTROL
and the power level is set to maximum.
3. Disable. Touch the
sensor of the cooking zone you want to disable.
c. Touch the
BOOSTER CONTROL
operate in its previous setting.
d. Set the slider control to the desired power level.
This function is available for each cooking zone.
The cooking zones will operate in their previous settings after 5 minutes.
As the boost function of 1st cooking zone is activated ,the 2nd cooking zone is
limited under level 2 automatically. Vice versa.
If the original heat setting equals 0, it will return to 9 after 5 minutes.
1. Enable. Touch the
of the cooking zone you want to enable.
The booster function
SELECTION OF COOKING ZONE
. The indicator displays b
SELECTION OF COOKING ZONE
. The cooking zone will
The keep-warm function
SELECTION OF COOKING ZONE
43
-
-
-sensor