Installation - Schaub Lorenz IN3FZ Bedienungsanleitung

put on the appliance, because they may become hot.
3. Do not place or leave any magnetisable objects (e.g. credit cards, memory cards)
or electronic devices (e.g. computers, MP3 players) near the appliance, as they
may be affected by its electromagnetic field.
4. After use, always switch off the cooking zones as described in this manual(i.e.
by using the touch controls). Do not rely on the auto-detection feature to switch
off the cooking zones when you remove the cookware.
5. The appliance is not allowed to be operated with an external timer or a separate
remote-control-system.
6. Switch off the appliance after operation as described in this instruction manual.
7. Do not put any heavy items on the hob.
8. Only use cookware which is suitable to be used on a induction hob; otherwise
you will damage the appliance.
9. The blades of scrapers for cleaning an induction hob are very sharp. Do not cut
yourself, especially when you have removed the safety cover of the scraper.
10. If any cracks occur on the glass-ceramic , switch off the appliance and
disconnect it from the mains. Risk of electrical shock!
11. This appliance is designed for the use by adults only.
12. The appliance is not intended for commercial purposes.
13. Do not use the appliance for camping.
14. Do not use the appliance in public transport.
15. The appliance is designed for indoor use only.
16. This appliance complies with the current European safety legislation. We do
wish to emphasize that this compliance does not negate the fact that the
surfaces of the appliance will become hot while operating and will retain and
emit heat even if it has stopped operating.
Do not use a socket board or a multi socket when using 220–240V and
50/60 Hz alternate current (AC).All electrical connections which may be
damaged must be repaired by a qualified professional. All repairs should
be performed by your authorized after sales service.
1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-
protection.
3. Check that the appliance and the power cord are not damaged.

4. INSTALLATION

WARNING!
Unpacking and positioning
35