Schaub Lorenz IN3FZ Bedienungsanleitung Seite 36

4. Connect the appliance to a dedicated socket only.
5. Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
6. Connect the appliance to the mains properly.
A. Selection of installation equipment
Cut out the installation hole as described on the drawing below. For installation
and use, a minimum of 50 mm space shall be preserved around the hole. The
thickness of the work top should be at least 30 mm. Choose heat-resistant materials
for the work top only to avoid any deformation caused by the heat-radiation of the
appliance.
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
590
The appliance must be ventilated properly. Do not block the air outlet and inlet.
Ensure the ceramic cooker hob is in proper operating state. The safety distance
between the hob and a cupboard above should be at least 760 mm.
Installation
520 60 56 560 +4 490
+1
36
+4 50 min.
+1