Schaub Lorenz IN3FZ Bedienungsanleitung Seite 42

2. Place a cookware on the desired cooking zone.
Always keep the bottom of the cookware as well as
the cooking zone clean and dry.
3. Select the power level by touching a
COOKING ZONE
4. Set the power level with the
a. When you do not set a power level within 1 minute,
the appliance will switch off automatically. You have to
start at step 1 again.
b. You can change the power level whenever you want
while cooking..
The display indicates
You have not placed the cookware on the correct zone, or
you use unsuitable cookware, or
You use cookware which is too small or the cookware is not centred properly
on the cooking zone.
 While using unsuitable cookware, the cooking zone does not heat up. The
display goes off automatically after 1 minute even if you have not placed
suitable cookware on the cooking zone.
1. Touch the
SELECTION OF COOKING ZONE
cooking zone you want to switch off.
2. Switch off the relevant cooking zone by setting the
SLIDER CONTROL
0
3. Switch off the appliance with the O
sensor. The indicator flashes.
SLIDER CONTROL
↔ indicator of the power level alternately.
When you have finished cooking
to 0. Check that the indicator displays
N
SELECTION OF
.
-sensor of the
/O -sensor.
FF
42