Schaub Lorenz IN3FZ Bedienungsanleitung Seite 38

1. Fix the hob on the worktop by screwing 2 brackets on the bottom of the hob
after installation.
2. You can adjust the bracket-position relevant to the thickness of the worktop.
1. The hob must be installed by a qualified professional. Do not carry
out the installation yourself.
2. Do not install the appliance above cooling equipment, dish washers
or laundry dryers.
3. When installing the appliance ensure optimal heat radiation to
maintain the operating safety.
4. The wall and the reach of the heat radiation above the worktop must
be made of heat-resistant materials.
5. To avoid any damage, the sandwich layer and adhesive must resist
heat.
The appliance must be connected to the mains by a qualified
professional, who is familiar with and adheres to the local requirements
and supplementary regulations of your electricity supplier.
1. Your household power supply must meet the power consumption of the
appliance.
2. The voltage must meet the values on the nameplate.
3. The power cord must withstand the values on the nameplate.
4. When connecting do not use adapters, reducers and branching devices as they
cause overheating. RISK OF FIRE!
5. The power cord must not touch hot areas and its temperature must not exceed
75 C.
0
CAUTION!
Electrical connection
DANGER!
38