Technical Data; Safety Regulations - EINHELL DSS 260/2 Bedienungs- Und Wartungsanleitung

Anleitung DSS 260-2 SPK1
Dear Customer,
Before you use the impact screwdriver for the first
time, please read these instructions and note the
information for the tool's operation and maintenance.
Always keep this manual with the tool.

1. Technical data

Release torque max.
Working range (max. thread size)
Permissible working pressure max.
Idle speed 7000 min
Sound power level LWA 83.9 dB(A)
Sound pressure level LPA 94.9 dB(A)
Vibration a w
Weight
Square drive
Air consumption approx. 115 l/min.
Recommended hose diameter internal
Air quality cleaned and oiled
Air supply
via conditioning unit with filter pressure reducer
and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW
Work settings
6 bar working pressure set at the pressure
reducer or filter pressure reducer
Please note:
When working with the impact screwdriver, be
sure to wear the necessary protective clothing.
Observe the safety regulations.
2. Illustration
1 trigger lever
2 air regulator / torque regulator
3 selector pin Forward/Reverse
4 square drive for nut socket (mounting shaft)
5 plug-on nipple for the air supply
13.07.2006 10:14 Uhr
4
3
1
312 Nm
M14
6.3 bar
-1
2
2.82 m/s 2
3. Proper use
2.3 kg
The impact screwdriver is a handy pneumatic tool for
1/2 inch
use in DIY and automotive workshops. It is ideal for
fastening and releasing threaded connections on
motor vehicles (wheels etc.) and on farming
Ø 8 mm
equipment.
The exhaust air leaves the tool through the outlet to
the bottom. The drive sockets, bits and extension
bars with lock pin and rubber retaining ring are in
accordance with DIN. The drive sockets and bits can
be changed quickly and easily. The air supply is
connected by means of a plug-in nipple and a quick-
release coupling.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.

4. Safety regulations

Take suitable precautions to protect yourself and
your environment from potential hazards.
Never put the impact screwdriver to any use other
than that intended.
Keep pneumatic tools safe from children.
Always concentrate while you work. Do not work if
you are tired.
Use only a quick-release coupling to connect up
the air supply.
It is imperative to use a pressure reducer to set
Seite 5
GB
5
5