Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Do not dispose off battery packs by
throwing them into fire or into house-
hold garbage.
Avoid contact with liquids oozing out of
defective battery packs. Rinse thor-
oughly if you accidentally come in con-
tact with the fluid. Also consult a doctor
if the fluid comes in contact with your
eyes.
While it is charged, the accumulator
must rest freely on a fireproof surface.
No inflammable parts are allowed next
to or above the accumulator.
Battery disposal information
Remove the battery prior to disposing of
the appliance and dispose of properly!
Do not open the battery, as there is a
risk of an electrical shock; also, irritating
or caustic vapors can escape.

Start up

Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Note: Please refer to page 2 for figures of
the appliance and the operation.
1 Joint at the appliance
2 ON/OFF foot switch
3 Rechargeable battery, detachable
4 Replacement battery (Option)
5 Unlocking button, battery
6 Dirt container, detachable
7 Unlocking mechanism for dirt container
8 Casing
9 Roller brush
10 Roller brush unlocking button
11 Strut parts
12 Handle
13 Kick plate to tilt the appliance
14 Rapid charger with charging status dis-
play and charging cable
15 Operating state indicator (LED)
Attach the strut
and the handle
see Figure 2
The strut consists of 3 parts. While assem-
bling it, make sure that the parts lock into
each other.
 Assemble the strut parts.
 Mount handle onto strut.
 Insert the entire strut with the locking
button into the joint on the appliance.
Charge the battery
see Figure 3
The battery is precharged at the time of de-
livery. Charge it after work and when need-
ed.
Note
The battery can be charged only when it is
removed out of the appliance.
 Connect battery with charger using the
charger cable.
 Insert the charger delivered with the ap-
pliance into a proper socket.
The charger display blinks green. The bat-
tery is being charged.
Charging current for empty battery
Charger
Quick charger
(available as optional accessory)
Note
If the charging time is exceeded, the charg-
er shifts to retention charging. The charger
display blinks green.
NOTICE
Disconnect the charger from the mains af-
ter the charging process is complete to re-
duce energy use.
Replacing the battery
see Figure 4
 Press the lock release button and pull
the battery out toward the rear.
 Insert the replacement battery into the
intake and lock it.
– 3
EN
4 h
1,5h
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis