Homewhiz Turn On/Off; Recovery - Grundig GSBS14620XWF Bedienungsanleitung

flash as the led over the
button numbered 1. When the
connection is established, the
led over the button numbered 1
shall be constantly on.
6. After connection, you can open
the application and perform the
setup as per the application's
instructions.
If you want to use the
email feature, you can
activate it by entering
your email address
during application setup.
You can deactivate or
reactivate the email
C
feature any time you want
from the settings menu
of your application.
Example mail subject:
You have a message from
your refrigerator.
Example mail content:
Door open
To be able to use the
email feature, your
internet service provider
must allow access to port
C
number 587. When you
have a problem regarding
the email feature, contact
your internet service
provider to ensure the
suitability of the related
port.

5.4 Homewhiz Turn On/Off

After your refrigerator connects
to the home network for the first
time, the HomeWhiz feature can be
turned on and off by short pressing
30
button number 1, without the
need to enter the password again.
HomeWhiz state can be controlled
through the on/off area right above
the button numbered 1.
If connection cannot be
C
established, repeat the
initial setup settings over
the product.

5.5 Recovery

If you believe you experience any
control or connection problem,
please perform the steps below.
Observe whether the problem
persists after the operation. If the
problem persists, perform the next
operation.
1. Close and reopen the product
application.
2. Turn HomeWhiz off and on over
the product. Reconnect over the
application.
3. Repeat the initial setup over the
product.
If the error persists, contact
service.