Bosch MUM52 serie Gebrauchsanleitung Seite 17

Predetermined breaking point
The built-in predetermined breaking point
protects the drive of the appliance. If an overload
occurs, the drive shaft of the continuous-feed
shredder breaks. However, the drive shaft can
easily be replaced.
A new drive shaft with driver is available from
customer service.
Reversible slicing disc – thick/thin
for slicing fruit and vegetables.
Process at setting 5 (3).
Designation on the reversible slicing disc:
"1" for the thick slicing side
"3" for the thin slicing side
t~êåáåÖ>
qÜÉ=êÉîÉêëáÄäÉ=ëäáÅáåÖ=ÇáëÅ=áë=åçí=ëìáí~ÄäÉ=Ñçê=
ëäáÅáåÖ=Ü~êÇ=ÅÜÉÉëÉI=ÄêÉ~ÇI=êçääë=çê=ÅÜçÅçä~íÉK=
päáÅÉ=ÄçáäÉÇI=ï~ñó=éçí~íçÉë=çåäó=ïÜÉå=íÜÉó=~êÉ=
ÅçäÇK
Reversible shredding disc –
coarse/fine
for shredding vegetables, fruit cheese, except
for hard cheese (e.g. Parmesan).
Processing at setting 3 (2) or 4 (3).
Designation on the reversible shredding disc:
"2" for the coarse shredding side
"4" for the fine shredding side
t~êåáåÖ>
qÜÉ=êÉîÉêëáÄäÉ=ëÜêÉÇÇáåÖ=ÇáëÅ=áë=åçí=ëìáí~ÄäÉ=
Ñçê ëÜêÉÇÇáåÖ=åìíëK=pÜêÉÇ=ëçÑí=ÅÜÉÉëÉ=ïáíÜ=íÜÉ=
Åç~êëÉ=ëáÇÉ=çåäó=~í=ëÉííáåÖ=T=EQFK
Grating disc – medium-fine
for grating raw potatoes, hard cheese
(e.g. Parmesan), cooled chocolate and nuts.
Process at setting 7 (4).
t~êåáåÖ>
qÜÉ=Öê~íáåÖ=ÇáëÅ=áë=åçí=ëìáí~ÄäÉ=Ñçê=Öê~íáåÖ=ëçÑí=
ÅÜÉÉëÉ=~åÇ=ÅÜÉÉëÉ=ëäáÅÉëK
Working with the continuous-feed
shredder

Press the Release button and move
the swivel arm to position 2.

Insert the bowl:
– Tilt the bowl forwards and then set
it down.
– Turn anti-clockwise until it locks
into place.

Press the Release button and move
the swivel arm to position 3.

Remove drive cover from the drive
of the continuous-feed shredder.
Robert Bosch Hausgeräte GmbH

Fig.  Hold drive shaft with the predetermined
breaking point face down with one hand
underneath.

Attach required slicing or shredding disc.
In the case of reversible discs, ensure that
the required side is face up.

Grip drive shaft at the upper end and insert
into the housing.

Attach the cover (note mark) and turn all
the way in a clockwise direction.

Place continuous-feed shredder on the drive
and turn all the way in a clockwise direction.

Turn rotary switch to recommended setting.

Put food to be processed in the feed tube
and push down with the pusher.
t~êåáåÖ>
mêÉîÉåí=íÜÉ=Åìí=áåÖêÉÇáÉåíë=Ñêçã=ÄìáäÇáåÖ=ìé=
áå íÜÉ=çìíäÉí=çéÉåáåÖK
Tip: To ensure evenly cut ingredients, process
slender ingredients in bunches.
Note: If the food to be processed sticks in
the continuous-feed shredder, switch food
processor off, pull out mains plug, wait until the
drive comes to a standstill, remove cover from
the continuous-feed shredder and empty feed
tube.
After using the appliance

Switch off the appliance with the rotary
switch.

Rotate the continuous-feed shredder in an
anti-clockwise direction and remove.

Rotate the lid in an anti-clockwise direction
and remove.

Remove drive shaft together with disc.
To do this, press finger from below against
the drive shaft (Fig.

Clean parts.
Blender
Fig. 
kÉîÉê=éä~ÅÉ=ÑáåÖÉêë=áå=íÜÉ=~íí~ÅÜÉÇ=ÄäÉåÇÉê>=
aç=åçí=êÉãçîÉL~íí~ÅÜ=íÜÉ=ÄäÉåÇÉê=ìåíáä=íÜÉ=
ÇêáîÉ=áë=~í=~=ëí~åÇëíáää>=léÉê~íÉ=íÜÉ=~ëëÉãÄäÉÇ=
ÄäÉåÇÉê=çåäó=~åÇ=ïáíÜ=íÜÉ=äáÇ=~íí~ÅÜÉÇK
fÑ=éêçÅÉëëáåÖ=Üçí=äáèìáÇëI=ëíÉ~ã=ÉëÅ~éÉë=
íÜêçìÖÜ=íÜÉ=ÑìååÉä=áå=íÜÉ=äáÇK=^ÇÇ=~=ã~ñK=MKR=
äáíêÉë=çÑ=Üçí=çê=ÑêçíÜáåÖ=äáèìáÇK

).
oáëâ=çÑ=áåàìêó=Ñêçã=ëÜ~êé=Ää~ÇÉëL
êçí~íáåÖ=ÇêáîÉ>
oáëâ=çÑ=ëÅ~äÇáåÖ>
en
17