urmet domus 2GO! Bedienungsanleitung Seite 13

7. You will need to program indoor station C2 to call C1 to make the opposite call possible.
The auto-on and video switching functions will not be lost if the intercom function
because these are available when the audio is off.
The automatic door opener function will not be lost if the intercom function
this is available when the audio is off.
DOOR PHONE CALL TONE
Five tones can be selected on 2GO! system indoor stations. The tones can be programmed also by the end
user by following the simple sequence below.
1. Hold the door opener button pressed. Press and release the button. The indoor station will play a
tone.
2. Hold the door opener button pressed and press the button
3. Release the door opener button when you have chosen the tone you want. The tone is now
programmed.
FLOOR CALL TONE
Five fl oor call tones can be selected on 2GO! system indoor stations. The tones can be programmed also by
the end user by following the simple sequence below.
1. Hold the door opener button pressed. Press and release the button
tone.
2. Hold the door opener button pressed and press the button
3. Release the door opener button when you have chosen the tone you want. The tone is now
programmed.
24
is programmed
is programmed because
again to change the tone.
. The indoor station will play a
again to change the tone.
DS1782-004A
TECHNICAL SPECIFICATIONS OF THE DEVICES
Ref. 1082/121
Power voltage:
Power:
Dimensions (L x H x P):
Working temperature range:
Door unit
Dimensions (L x H x P):
Working temperature range:
Ref. 1703/84
Working temperature range:
Ref. 1082/51
Working temperature range:
DS1782-004A
230Vac + -10%
50Hz
60VA
180mm (10 DIN modules) x 90 x 75
-5 +40°C
185 x 99 x 35mm
-5 +40°C
-5 +40°C
-5 +40°C
25