Safety Instructions For The Hot Air Blower; Safety Information For Solid Fuel Lighters; Additional Safety Instructions - FLORABEST IAN 275925 Handbuch

To avoid potential risks, damaged
■
mains cables should be replaced by
the manufacturer or the manufactur-
er's customer service department or
a similarly qualified person .
NOTE
Spare parts not listed (such
►
as switches and replacement
nozzles) can be ordered via our
call centre .
Safety instructions for the hot
air blower
NOTICE!
► This tool must be placed on its stand when
not in use .
Careless use of the appliance can
■
cause a fire .
Take care when using the appliance
■
in the vicinity of inflammable mate-
rials .
Do not aim at the same place for a
■
prolonged period of time .
Do not use in the presence of an
■
explosive atmosphere .
Heat can be transferred to combus-
■
tible materials which are hidden
from view .
Replace on stand after use and al-
■
low to cool before putting it away .
Do not leave the appliance unat-
■
tended while it is in operation .
■ 4 │ GB │ IE │ NI
IB_275925_FUV2000A1_LB6.indb 4
Safety information for solid
fuel lighters
Check that the solid fuel lighter is
■
in the correct position .
Disconnect from mains before re-
■
moving from fire .
Allow solid fuel lighter to cool down
■
before packing away .
The power cable or other flamma-
■
ble materials may not come into
contact with hot components of the
solid fuel lighter .

Additional safety instructions

CAUTION! Avoid the risk of injury
or fire as well as health risks:
In case of danger, remove the plug
■
from the socket immediately .
CAUTION!
RISK OF INJURY!
Never use the appliance as a hair
►
dryer .
Never aim the hot air stream at
■
people or animals .
Never look directly into the nozzle
■
opening at the outlet .
CAUTION!
RISK OF BURNS!
Do not touch the hot nozzle .
►
Wear protective gloves .
■
Wear safety goggles .
■
FUV 2000 A1
03.02.17 08:46