Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Betriebsanleitung
Operating Instructions
Technical Specifications
Power Supply:
Supply Current:
Pin Connections:
Computer
HART
Output Level:
Isolation:
Software Requirements:
Operating System:
Installation:
Environmental Specifications:
Temperature:
Operating:
Storage:
Humidity:
Physical Dimensions:
Enclosure:
Interface
Connector Cable:
C73000--B7164--C170--2
Electrical Specifications:
No external supply required. System powered
via RS232 inputs. Compatible with RS232
(evels from +/-- 4V to +/--12V).
l.5mA pro +/--4V inputs
4.0mA pro +/--12V inputs
Power is drawn equally from all RS232
inputs, regardless of state. Supply current
does not include current load on output pins.
RS232 DB--9 connector
2 Pin terminal block.
Polarity insensitive termination.
Fully HART compliant.
0.5 +/-- .lVpp trapezoidal wave
bei 1200/2200 Hz.
1500VDC isolation between instrument
and computer.
MSDOS Version 5.0 or higher,
or equivalent OS that supports
serial COM port.
Set application software to COM
port used by DB--9 serial port.
0° C to 50° C (32° F to 122° F)
--40° C to 85° C (--40° F to 185° F)
0% to 95% relative humidlty
(non--condensing).
(49.5 x 33.3 x 15 mm),
ABS enclosure suitable for industrial use.
twisted pair wire about 1,80 m
to dual test clips.
Polarity insensitive termination.
Koppelmodul für SIMATIC PDM
Interface for SIMATIC PDM
/ 16
13
Werbung
