Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Koppelmodul für SIMATIC PDM
Interface for SIMATIC PDM
Getting Started
1. Hardware and software requirements:
The interface for SIMATIC PDM
Computer with one or more RS232 serial ports
Male 9--pin DB--9 connector on at least one serial port, or 25--pin DB--25 connector
with DB--25 to DB--9 converter cable (converter cable not in the scope of delivery)
Operating system software such as MSDOS V5.0 or greater that supports RS232 se-
rial ports
Software for communicating with HART instruments (e.g. SIMATIC PDM):
2. Check your package.
Your interface package contains the following items:
-- The interface
-- Operating Instructions
If any of these items is missing or damaged, please contact your Siemens service partner.
10
/ 16
Betriebsanleitung
Operating Instructions
C73000--B7164--C170--2
Werbung
