Speed Controller | Accessories - Batavia 7050248 Bedienungsanleitung

GB
SPEED CONTROLLER
With the speed controller (|2) you can adjust the speed according to application. Select the appropriate
speed setting and make sure the multitool does not become overloaded and stops running.
For increasing the speed setting, turn the speed controller (|2) to the desired setting. The controller can
be adjusted from 1 – 6. The speed rate can also be changed during operation.
The required speed rate for cutting resp. sanding a workpiece depends on the material that has to be
machined. For best performance, make some practical tests.
TOOL
10 |
MATERIAL
Timber Products
Plastics
Timber Products
Plastics
Timber Products
Plastics
Varnish and coatings
Remaining adhesive
Timber Products
Plastics
Varnish and coatings
Metals
PURPOSE
Cross Cuts
Drop Cuts
Close Cuts
e. g. Cutting-back Door Frames
Cross Cuts
Drop Cuts
Close Cuts
e. g. Cutting-back Door Frames
Scraping and Cleaning
Surfaces, Removing
remaining Adhesives and
Coatings
Sanding Work, due its
size also suitable for
Corners