Product Identifi Cation Label - EMAK Cheyenne 92-110-132 Betriebshandbuch

(1) Hood with storage space
The hood is a combination of plastic and metal covers, which contain storage space for
the battery and the fuel tank.
(2) Frame with bumpers
The frame with bumpers serves as a bearing element for most of the main parts of the
machine.
(3) Front axle with wheels including steering*
The front powered axle enables the wheels to turn. The wheels are turned by the steering
wheel by means of a comb mechanism. All-wheel drive is engaged automatically, with
power distributed to the individual axles depending on the current traction conditions and
the travel mode (forward or reverse).
(4) Mowing deck
The mowing deck mows the grass. It is located under the machine. It consists of a cover,
main plate, blade holders and mowing blades. The deck is powered by the machine's engine
1.2
through an electromagnetic clutch and a V-belt.
(5) Engine, gear box including rear-wheel drive via a by-pass
The four-stroke petrol engine is mounted to the frame in the rear part of the machine. The
gear box with hydrostatic power transmission serves to change gears while driving. The
by-pass lever is located on the machine's rear plate. It serves to engage and disengage
the gear box for the rear wheels.
(6) Folding frame of the machine
The folding frame is intended to prevent the machine from rolling over by 180° if for any
reason it loses stability and rolls on to its side.
(7) Driver's location
The comfortable seat enables easy access to all control elements on the machine. The
seat used ensures safe and comfortable operation.
*ATTENTION: Due to construction design reasons the machine does not permit the
disconnection of the front axle drive – the hydraulic system is not equipped with
a by-pass valve, which significantly limits the option of moving the machine when the
engine is not running. During such movement the front axle is significantly overloaded
and may be damaged. The by-pass lever on this machine is primarily used to bleed the
hydrostatic system.
The machine must not be used (gear shifted into drive) if the by-pass lever is in the
disengaged position - there is a danger of damage to the transmissions!!
1.3 Product identifi cation label and other labels with symbols used on the
machine
1.3.1 Product identifi cation label
Every riding mower is marked with a product identification label, located behind the seat. It can be
accessed by moving the seat forward.
1. Machine model
2. Engine model
3. Year of production
4. Weight
5. Name and address of the manufacturer
1.3.1
6. Compliance mark of the product
7. Logo of the manufacturer
The seller will write down the serial number on the other side of the front page of this
manual when handing over the machine.
63