Technical Information - EMAK Cheyenne 92-110-132 Betriebshandbuch

1. TECHNICAL INFORMATION

1.1 Use
The machine model 92 4x4 or 110 4x4 or 132 4x4 under the brand name CHEYENNE - TONKAWA
is a dual-axle terrain riding mower designed for mowing maintained and unmaintained grass-
covered level and sloped areas up to an incline of 22°(40%), that are free of foreign objects (stones,
fallen branches, bones, hard items, etc.). It can be used to mow multi-year vegetation, intertwined with
raspberries, blackberries and various other weeds.
Any use of this riding mower, which is not described in this user's manual and
which goes beyond the use here described is considered to be in contradiction
to its intended purpose or use. The manufacturer of the machine is not responsible for
damages arising from such use; the risk is borne by its user. The user is also responsible
for adhering to the conditions prescribed by the manufacturer for the operation,
maintenance and repairs of this machine, which may only be used, maintained and
repaired by persons that know these conditions and have been informed about
possible dangers.
Only accessories, which have been approved by the manufacturer may be connected
to the machine. The use of other accessories will result in the warranty being
immediately void.
1.2 Main parts of the riding mower
The garden tractors Oleo-Mac Cheyenne and Efco Tonkawa can be equipped with three different cutting
decks of 92 cm, 110 cm or 132 cm wide. Depending on the machines mounted cutting deck assume the
name of:
Oleo-Mac Cheyenne 92 4x4 and Efco Tonkawa 92 4x4 with plate of 92 cm in width,
Oleo-Mac Cheyenne 110 4x4 and Efco Tonkawa 110 4x4 with plate of 110 cm in width,
Oleo-Mac Cheyenne 132 4x4 and Efco Tonkawa 132 4x4 with plate of 132 cm in width.
The assembly of the cutting deck, being a complicated and dangerous, must be performed by
an authorized Service Centre, before the machine is delivered to the buyer.
Lawnmower model 92 4x4 or 110 4x4 or 132 4x4 comprise of the following main parts:
62