Situating The Telephone - comfortel 1100 Inbetriebnahme- Und Kurzbedienungsanleitung

Situating the Telephone

Requirements
– An ISDN socket in the immediate vicinity of the PBX installation site
Note: The system telephone can be operated not only on an internal S
port but also on a U
can be connected. See also the PBX manual.
Warning: Any liquid that penetrates the casing can result in a life-
threatening electric shock or can damage or destroy or the device.
Attention: Mechanical stress and electro-magnetic fields can result in the
damage or destruction of the device or interfere in its function.
Steps to Take
•
Place the telephone on a clean, flat surface.
Attention: Some plastics and paint used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic
chemically changed in this way on the feet of the device may cause damage
to the surface of your furniture.
P0
Only operate the system telephone in closed, dry rooms.
Avoid mechanical stress (for example, vibrations) and the proximity of
equipment that radiates electro-magnetic fields (for example, amateur
radio sets, mobile phones, DECT systems, WLAN routers, etc.).
Protect the system telephone from direct sunlight, condensation, dirt,
dust, caustic liquids and steam.
Note the values for ambient temperature and humidity indicated in the
technical specifications.
Place the system telephone on a non-slip pad.
port on the PBX. Only one telephone per U
Preparation
0
port
P0
29