This section describes the preparations required before commissioning the device. This
includes connecting the receiver and/or a headset (not included in the package).
Furthermore, this includes installing the telephone in a suitable location.
Connecting the Receiver
Steps to Take
1.
Insert the plug, as shown in
into the jacked labelled with
2.
Guide the cable to the outside using the corresponding cable channel (see
Fig.
3.
Insert the other end of the spiral cord into the jack on the receiver.
Preparation
5).
Fig.
5, the longer straight end of the spiral cord
on the bottom of the telephone.
Fig. 5: Receiver connection
Preparation
27