Telephoning; Calling Someone; Accepting An Incoming Call - comfortel 1100 Inbetriebnahme- Und Kurzbedienungsanleitung

Telephoning

This section provides a short introduction to telephoning using the system telephone.
Descriptions are given on how to call someone, how to accept a call and how to transfer a
call. All additional functions are described thoroughly in the Operating and Configuration
Manual on the Auerswald Mega Disk.

Calling Someone

When you dial the telephone number with dial preparation as described in the
following, you will be able to make corrections while entering the telephone
number.
Steps to Take
1.
Dial a telephone number.
You can use the
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number. (exception: direct exchange access). The default
exchange line access number on the PBX is "0" in the factory settings;
however, this can be changed for several PBXs (see the PBX manual).
2.
Pick up the receiver or press the hook key.

Accepting an Incoming Call

When you receive a call, proceed as described in the following.
Steps to Take
•
Pick up the receiver or press the hook key.
Note: If you are not present once in a while or cannot accept the call for any
other reason, the telephone number of the caller is saved in the caller list
(in as far as the telephone number is available).
Note: Calls made from the PBX (wake-up calls, alarm calls, door terminal
calls) are displayed in plain text and, if necessary, can be confirmed by
36
Telephoning
softkey to delete the previous character.
The subscriber is called.
You are connected with the caller.