Appendix; Querying The Firmware Version; Performing A Firmware Update - comfortel 1100 Inbetriebnahme- Und Kurzbedienungsanleitung

Appendix

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Querying the Firmware Version

Steps to Take
1.
Press the
2.
Use the
3.
Use the

Performing a Firmware Update

Note: In addition to the PBX configuration (COMset), a regular update of all
connected system telephones can be configured (see the PBX manual).
Requirements
– Existing ISDN connection via the PBX
Steps to Take
1.
Press the menu key (key to the left under the display).
2.
Use the
firmware update and press the
Note: If no server telephone number is displayed or if you are operating the
telephone outside of Germany, you can now enter/change the telephone
number using the keypad. You can use the
previous character.
3.
If the telephone number is correctly displayed, press the
38
Appendix
softkey (key next to the display).
softkeys to scroll to the selection FW TEL.
The firmware version of the telephone is displayed.
softkeys to scroll to the selection FW PBX.
The firmware version of the PBX is displayed.
softkeys (keys next to the display) to scroll to the menu
The server telephone number "053069200510" is displayed – if
previously entered in the configuration. In front, the exchange line
access number is displayed – unless the telephone has been
configured with direct exchange access in the PBX.
softkey.
softkey to delete the
softkey.