Initiating A Query Call (Second Call); Transferring A Call - comfortel 1100 Inbetriebnahme- Und Kurzbedienungsanleitung

pressing the
receiver).

Initiating a Query Call (Second Call)

During a call, proceed as described in the following.
Steps to Take
1.
Use the
query/transfer and press the
2.
Dial a telephone number.
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number. (exception: direct exchange access). The default
exchange line access number on the PBX is "0" in the factory settings;
however, this can be changed for several PBXs (see the PBX manual).
Note: If you would like to cancel the call (it is busy or no one answers), use
the

Transferring a Call

In order to transfer a call, first initiate a query call, announce the call and then
connect both communication partners.
If you would like to transfer an external communication partner to another
internal subscriber, you do not have to wait until the subscriber being called via
the query call accepts the call; you can hang up the receiver while this call is
being made. The internal subscriber will continue to be called. If the subscriber
accepts the call, the connection is established.
If the subscriber being called does not accept the call, the call is transferred
back to your telephone 60 seconds later (your telephone rings).
softkey (alarm calls are confirmed after first picking up the
softkeys (keys next to the display) to scroll to the function
You will hear the internal dial tone. Your current communication partner
is kept on hold on the PBX and is listening to hold music.
The subscriber is called.
softkeys to scroll to the function back and press the
softkey.
Telephoning
softkey.
37