Installing The Comfortel Set Configuration Software - comfortel 1100 Inbetriebnahme- Und Kurzbedienungsanleitung

Commissioning

Installing the COMfortel Set Configuration Software

Requirements
– The Auerswald Mega Disk contained in the package (as of 6.13)
– A PC with the following features:
– Existing PC connection to a PC interface on the PBX (see the PBX manual)
Steps to Take
1.
Insert the CD (Auerswald Mega Disk) into the CD-ROM drive.
Note: The following steps describe how to configure the settings on the
operating system XP. If using another operating system, refer to the
documentation of your operating system.
2.
If the CD does not start automatically, click Start and then Run.
3.
Click Browse and open the corresponding CD-ROM drive. Double-click the
autostart.exe application in the main directory. Click OK.
4.
Follow the instructions on the screen by repeatedly clicking Next and
selecting the telephone in question.
5.
Continue following the instructions on the screen and select the
configuration software COMfortel Set.
6.
Follow the instructions displayed on the screen.
32
PC with Intel Pentium 800 MHz or compatible processor
Windows XP (as of Service Pack 3), Windows Vista 32/64-bit (as of
Service Pack 2), Windows 7 32/64-bit, Mac OS X (as of 10.5), Linux (as
of Kernel 2.6)
Memory (RAM: 256 MB, recommended 512 MB;
for Windows Vista/Windows 7: 512 MB, recommended 1 GB
5 MB free hard disk space for COMfortel Set
85 MB free hard disk space for Java Runtime
USB interface (if needed): USB specification 1.1 or 2.0
CD-ROM drive
Mouse or compatible pointing device
SVGA graphics card with a resolution of 800 x 600;
recommended 1024 x 768 and 65536 colours (16 bit)