Maintenance - Renkforce 1052399 Bedienungsanleitung

11. Maintenance

Regularly check the safety of the mixer, e.g. for damage to the mains adapter or the casing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately
and make sure it is not unintentionally operated. Pull the power unit out of the socket!
It can be assumed that safe operation is no longer possible if:
• there is visible damage to the device or the power unit
• the device no longer works
• the device was stored under unfavourable conditions for an extended period of time or
• after exposure to extraordinary stress caused by transport
Always observe the following safety information before cleaning or servicing the mixer:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work is
carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations must per-
form repairs.
Apart from this, the device does not need any servicing. The device's outside should be cleaned with a soft,
dry cloth or a brush only.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the ca-
sing.
35