Renkforce 1052399 Bedienungsanleitung Seite 30

AUX IN input (10)
Connect an additional line device (e.g. an MP3 player) to this input.
Headphone jack PHONES (11)
Connect headphones with a 6.3 mm jack plug to the headphones socket.
Connection of the record player earth GND (19)
If your record player has its own ground line (usually a thin, black cable with clamp-type socket), connect
it to connection terminal GND (19). This prevents humming distortion.
Connection of voltage supply AC IN (14)
The mixer and all connected devices must be switched off.
Make sure that all electrical connections and connection cables between the different devices
and any extension cables comply with the regulations and the operating instructions.
The mains socket to which the mains unit is connected must be close to the mixer and easily
accessible to quickly separate it from the mains voltage in case of an error.
Be careful when handling mains connections. Mains voltage may cause potentially fatal elec-
tric shock.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Before plugging in the mains plug, ensure that the device voltage indicated at the mains unit
corresponds to the available mains voltage. Do not connect the mains unit if the indication does
not correspond to the available mains voltage. Incorrect supply voltage may lead to irreparable
damage to the device and danger to the user.
• Connect the low-voltage plug of the enclosed mains adapter to the AC IN connection (14).
• Plug the mains adapter into a (230 V/50 Hz) mains socket.
30