Continuous Drainage - INVENTOR R2-ION8L Bedienungsanleitung

Continuous Drainage

Ensure that unit unplugged from power supply. Remove water
reservoir out and connect a water drain hose to spigot (as shown on
figures).The other end of this hose must be led to a drain or a
suitable receptacle to collect water.
Note- for the unit to drain correctly, no part of the hose should be
above the level of the water spigot.
Water spigot
Protection of falling over
The unit has heater inside. In order to avoid over heating, the
machine is equipped with tipping switch to automatically shut off
when the machine fall down.
13