*
Kondensator-Mikrofon für hohe Meßgenauigkeit und Stabilität.
*
Maximalwert-Haltefunktion zur Speicherung des Meßwertes.
*
LCD-Anzeigeelemente für geringen Stromverbrauch und gute
Ablesbarkeit, auch bei ungünstigen Lichtverhältnissen.
*
Robustes ABS-Gehäuse und hochwertige Bauteile garantieren
eine lange Lebensdauer.
*
Klein, leicht und zum "Einhandbetrieb" geeignet.
*
Batteriespannungsanzeige.
2. Technische Daten
Anzeige:
3 ½-stellig, mit 17 mm großen LCD-Anzeige-
elementen.
Meßfunktionen:
dB (A + C Bewertung), schnell, langsam, max.
Meßwert-Haltefunktion; analoger Ausgang
Meßbereiche:
A LO (low) – Bewertung: 35 ... 100 dB
A HI (high) – Bewertung: 65 ... 130 dB
C LO (low) – Bewertung: 35 ... 100 dB
C HI (high) – Bewertung: 65 ... 130 dB
Auflösung:
0,1 dB
Meßfehler:
(23°C +/- 5°C):
+/- 3,5 dB; 94 dB; 1000 Hz
Frequenzbereich:
30 Hz ... 10 kHz
Mikrofon:
elektrisches Kondensatormikrofon
Mikrofondurch-
messer:
13 mm
-3-
Note:
a) The characteristics of A-weighting is simulated as the "Human
Ear Listening" response. Typically, if making the environmental
sound level measurement, always select the A weighting
typically.
b) The C-weighting characteristics is near the "FLAT" response,
Typical, it is suitable for measuring the SPL (Sound pressure
level) or checking the noise of machinery (Q. C. check) &
knowing the real sound level of the tested equipment.
2. Base on various noise source, select the response time selector
Fast/Slow selector, (3) to "Fast" or "Slow" position.
3. Hold the instrument in hand and point the microphone at
measured noise source, the sound level will be displayed on
"dB" (decible) unit.
4. Max. Hold - During the noise measurement, if need to store the
maximum (peak) value on display, please press the Max. Hold
selector (4).
5. When measure long-term stability under slowly varing noise en-
vironment, please use the Max. Hold function to read maximum
value.
6. Press the MAX selector once again to cancel the max.
hold values.
6. Measuring consideration
1. Please don´t keep or operate the instrument at high
temperature & humidity environment for a long period.
2. Keep microphone dry & avoid serious vibration
3. Please select proper measurements range to minimise the
tolerance of readout.
-16-